Fiber Optical Repeater (RU)
2. Long-range performance: The dual-band fiber optic repeater delivers long-range performance, ensuring reliable signal transmission over a wide range of distances.
3. High data rates: This repeater allows for high data rates, ensuring fast and efficient communication across multiple devices.
4. Easy installation and maintenance: The compact design of the repeater allows for easy installation and minimal disruption to the environment. It’s also easy to maintain and upgrade.
Product Introduction
1. Dual-band Technology: This repeater supports two frequency bands – 850nm and 1310nm, allowing for flexible signal amplification and compatibility with different fiber optic networks.
2. High Power Amplification: With a power output of 20W, this repeater boosts the fiber optic signal, compensating for signal loss and extending the transmission distance.
3. Compact and Rack-mountable Design: The repeater features a compact and space-saving design, making it easy to install and integrate into existing network infrastructure.
4. Automatic Gain Control (AGC): The AGC feature ensures consistent signal strength by automatically adjusting the amplification based on the input signal, minimizing signal distortion and optimizing performance.
5. SNMP Monitoring: The repeater supports Simple Network Management Protocol (SNMP), enabling remote monitoring and management of the repeater, ensuring efficient network maintenance and troubleshooting.
Advantages:
1. Enhanced Signal Transmission: The Dual-band Fiber Optical Repeater 20W amplifies and boosts the fiber optic signal, ensuring robust and reliable transmission over long distances.
2. Extended Network Coverage: With its high-power amplification and dual-band capability, this repeater extends the coverage range of your fiber optic network, eliminating signal weak spots and dead zones.
3. Improved Network Performance: By compensating for signal loss and optimizing signal strength, this repeater enhances network performance, reducing latency and improving data transfer rates.
4. Scalable Solution: The repeater is designed to be scalable, allowing for the expansion and growth of your fiber optic network as needed, without compromising on signal quality or performance.
5. Cost-Effective: By amplifying and extending the existing fiber optic signal, this repeater eliminates the need for costly infrastructure upgrades, providing a cost-effective solution for network expansion.
RF Specification：
| Parameter | Uplink | Downlink | |
| Frequency Range | LTE FDD 1800 Band | 1710 – 1785 MHz | 1805 – 1880 MHz |
| LTE FDD 2100 Band | 1920 – 1980 MHz | 2110 – 2170 MHz | |
| Max. Output Power | -10dBm | 43dBm/band | |
| Max. Gain | 55dB | 55dB | |
| ATT Adjustable Range | 30dB, Step 1dB | 30dB, Step 1dB | |
| ATT Adjustable Error | ≤ |±1.5|dB | ≤ |±1.5|dB | |
| ALC Range | 20dB | 20dB | |
| ALC Accuracy | ≤ |±2.0| dB | ≤ |±2.0| dB | |
| Max. nondestructive input power | 20dBm | 20dBm | |
| Frequency Error | ≤ ±0.05ppm | ||
| Intermodulation | ≤ -50dBc | ||
| ACLR | ≥ 45dBc/5MHz; ≥50dBc/10MHz | ||
| PCDE | ≤ -45dBc | ||
| ACPR | ≤ -45dBc | ||
| EVM | ≤ 6% | ||
| Ripple In Band(p-p) | LTE FDD 1800 Band | ≤ 6dB | ≤ 6dB |
| LTE FDD 2100 Band | ≤ 5dB | ≤ 5dB | |
|
Spectrum Emission Mask PAR=8 |
5.05MHz≤f_offset<10.05MHz | -14dBm/100kHz | -14dBm/100kHz |
| 10.5MHz≤f_offset | -15dBm/30kHz | -15dBm/30kHz | |
| Spurious Emission
(at out of band offset ±10MHz) |
9kHz~150kHz | ≤ -36dBm /1KHz | ≤ -36dBm/1KHz |
| 150kHz~30MHz | ≤ -36dBm/10KHz | ≤ -36dBm/10KHz | |
| 30MHz~1GHz | ≤ -36dBm@100KHz | ≤ -36dBm@100KHz | |
| 1GHz~12.75GHz | ≤ -20dBm@1MHz | ≤ -20dBm@1MHz | |
| Time Delay | ≤ 5us | ≤ 5us | |
| VSWR | ≤ 1.5 | ≤ 1.5 | |
| Noise Figure | ≤ 5.0 | / | |
Optical Specification:
| Optical Connector | MU | FC/APC * 4, Independent optical path |
| RU | FC/APC * 1 | |
| Optical Wavelength | MU | TX: 1550nm / RX: 1310nm, Single Mode |
| RU | TX: 1310nm / RX: 1550nm, Single Mode | |
| Optical Output Power | MU | -2dBm ±3 |
| RU | 4dBm ±3 | |
| Fiber optic path attenuation range | 0 to 7dB, Max 10dB | |
| Fiber core number from MU to 1 RU | 1 core, Single Mode | |
Mechanical and electric Specification:
| RF Connector | MU | N(F) * 1 |
| RU | N(F) * 1 | |
| Power Supply | MU | DC -48V, ±20% |
| RU | AC 220V, ±20% | |
| Power Consumption | MU | ≤80W |
| RU | ≤300W | |
| Dimension | MU | 482*300*44mm |
| RU | 489*409*186.5mm | |
| Weight | MU | 8Kg |
| RU | 35Kg | |
| Environmental Class | MU | IP20 (Indoor) |
| RU | IP55 (Outdoor) + Fan + “H” Frame | |
| Operating Temperature | MU | -5 to +45 ℃ |
| RU | -25 to +55 ℃ | |
| Humidity | MU | 0 to 80% |
| RU | 0 to 95% | |
| Control Function | MU | Local: mini USB (External) Remote: GSM/UMTS900/1800/2100 Modem) |
| RU | Local: mini USB (Internal) |
Hãy là người đầu tiên nhận xét “Fiber Optical Repeater (RU)”
Sản phẩm tương tự
Phủ Sóng Di Động (IBS Devices)
Phủ Sóng Di Động (IBS Devices)
Antennas Systems
Antennas Systems
Phủ Sóng Di Động (IBS Devices)
Phủ Sóng Di Động (IBS Devices)
Phủ Sóng Di Động (IBS Devices)
Antennas Systems
Đánh giá
Chưa có đánh giá nào.